NORDTEK 
Finishes · 02 / 04 · NT · CL · M
DIMMA
Clear matte
The same paint, turned satin. The light is scattered instead of returned.
01 — Surface and specification
The same paint, turned satin.
DIMMA Clear matte
The light spreads into a soft band; the colour stays the paint’s own.
Minimum thresholds, not measured values. The matte film has its own gauge, given with the technical list under NDA.
All four finishes
NORDTEK · DIMMA · Clear matteThresholds only| Property | Threshold | On file |
|---|---|---|
| Gauge | on request | — |
| Surface | clear, satin | — |
| UV blocking | — | · |
| TPU stock | aliphatic, yellowing-resistant | ● |
| Heat–frost cycle | no cracking, clouding, blistering or colour change | ● |
| Topcoat | light scratches close with warmth | ● |
| Tensile strength | above 15 MPa | ● |
| Elongation | not less than 150% | ● |
| Warranty | 5 years, under the owner warranty terms | — |
● — test report on file· — not measured for matteThresholds, not measured values. The full technical list is provided to partners under NDA.
02 — Where it goes
Protection that changes the sheen.
DIMMA protects and turns gloss paint satin in one step. It reads best on whole cars or whole panels: a matte bonnet next to a gloss wing reads as two finishes.
- 01Full bodyEvery painted panel, one finish across the car.
- 02Full frontBonnet, bumper, wings and mirror caps: the panels the road reaches first.
- 03Lower panelsSills, lower doors and the arches behind the wheels.
- 04Touch pointsDoor edges, door cups, the load sill and boot lip.
03 — In the bay and after
Installation
Wet applicationA slip solution lets the film be placed, lifted and placed again before it is squeegeed down.
Read the surface twiceOn a matte surface bubbles and adhesive lines are harder to see. Check every panel at an angle, under one hard light.
Do not overwork itHeavy stretching and pressure can change how the satin reads. Handling notes come with the technical list.
Care
WashHand wash with a pH-neutral shampoo made for matte surfaces. Keep a pressure washer nozzle away from the edges.
Light scratchesFine marks from washing close again with warmth: sun on the panel or a rinse with warm water.
AvoidWax, polish and gloss sealants: they fill the texture and leave shiny patches.
Questions dealers ask
Is there a warranty?Five years on DIMMA, under the owner warranty terms. Film and labour on an accepted claim, at no charge to the owner.
What does it cost?Pricing is sent with the reply to an application, not published.
Roll format?1.52 m × 15 m.
KLARClear gloss
SVARTBlack gloss
NATTBlack matte